initcode.html
Sizes & Specs - Krawler™ T/A® KX
1Deep-lug tread pattern with a soft, grippy compound that grabs onto uneven surfaces for better traction
2Tread can be carved to better suit your individual requirements.
3Race-spec carcass
4Four nylon sidewall plies
5Brawny, solid sidewall lugs
6Rim protector
7* Years 2004 through 2008.
Krawler™ T/A® KX
Winner of more rock-crawling championships than all other tires combined.
Sizes & Specs - Krawler™ T/A® KX
| Tire Size |  ServiceDescription |
Sidewall |
MSPN | Rim Width Range (inches) |
Section Width on Measuring Rim Width |
Overall Diameter |
Tread Depth (in/32nds) |
Revs/Mile at 45 mph |
Max Load (lbs@psi) |
|---|---|---|---|---|---|---|---|---|---|
| 35x13.50R15/C | 114L | BSW | 44690 | 8.5 - 11 | 13.8 on 10 | 35 | 22 | 594 | 2600@35 |
| 37x12.50R17/C | 116L | BSW | 51716 | 8.5 - 11 | 12.9 on 10 | 37 | 22 | 562 | 2755@35 |
All Krawler T/A KX tires are L speed rated. Do not use at speeds in excess of 75mph.
Government UTQG Ratings do not apply to light truck sized tires.
1. The sizes shown are average design values for tires measured on specified measuring rim widths. Some tires may vary from this value by +/-3% of the section height (affecting overall diameter), and +/-4% of the section width.
2. Section width varies approximately 0.2" (5mm) for every 0.5" change in rim width.
WARNING: Serious or fatal injury may result from tire failure due to underinflation or overloading. To ensure correct air pressure and vehicle load, refer to vehicle owner's manual or tire information placard on the vehicle. Serious injury or death may result from explosion of tire/rim assembly due to improper mounting. Only tire professionals should mount tires and they should never inflate beyond 40 psi to seat the beads. Before mixing types of tires in any configuration on any vehicle, be sure to check the vehicle owner's manual for its recommendations.
DANGER: Never mount a 17" diameter tire on a 17.5" rim.
Inflation pressure increase must not exceed the maximum pressure branded on the tire sidewall. When a customer requests a replacement tire with a lower speed rating than the original equipment tire, you must clearly communicate to him or her that the handling of the vehicle may be different, and that its maximum speed capability is limited to that of the lowest speed-rated tire on the vehicle. Exceeding the lawful speed limit is neither recommended nor endorsed.
Government UTQG Ratings do not apply to light truck sized tires.
1. The sizes shown are average design values for tires measured on specified measuring rim widths. Some tires may vary from this value by +/-3% of the section height (affecting overall diameter), and +/-4% of the section width.
2. Section width varies approximately 0.2" (5mm) for every 0.5" change in rim width.
WARNING: Serious or fatal injury may result from tire failure due to underinflation or overloading. To ensure correct air pressure and vehicle load, refer to vehicle owner's manual or tire information placard on the vehicle. Serious injury or death may result from explosion of tire/rim assembly due to improper mounting. Only tire professionals should mount tires and they should never inflate beyond 40 psi to seat the beads. Before mixing types of tires in any configuration on any vehicle, be sure to check the vehicle owner's manual for its recommendations.
DANGER: Never mount a 17" diameter tire on a 17.5" rim.
Inflation pressure increase must not exceed the maximum pressure branded on the tire sidewall. When a customer requests a replacement tire with a lower speed rating than the original equipment tire, you must clearly communicate to him or her that the handling of the vehicle may be different, and that its maximum speed capability is limited to that of the lowest speed-rated tire on the vehicle. Exceeding the lawful speed limit is neither recommended nor endorsed.
