initcode.html
Sizes & Specs - Mud-Terrain™ T/A® KM
1The only tire to be recognized in the enthusiast publication's top 10 all-time off-road products
2DiggerLugz™ (upper sidewall traction bars and treadclearing shoulder void bars)
3Improved high-void tread design with larger footprint, interlocking tread elements and advanced compounding†
4Rim protector
5Dual-tread radius
6Computer-optimized tread design
7BFGoodrich® Tires’ TriGard® construction — innovative 3-ply polyester carcass
8Single strand beads on all dimensions (single wire wrapped continuously)
Mud-Terrain™ T/A® KM
Named one of the 10 most influential off-road products. What it is:The only tire named by jeep-enthusiast magazine “JP” as one of the 10 most influential off-road products of all time for its outstanding off-road traction and race-proven performance. Who it’s for: 4WD enthusiasts who want a more aggressive tire that delivers serious off-road traction.
Sizes & Specs - Mud-Terrain™ T/A® KM
| Tire Size |  ServiceDescription |
Sidewall |
MSPN | Rim Width Range (inches) |
Section Width on Measuring Rim Width |
Overall Diameter |
Tread Depth (in/32nds) |
Revs/Mile at 45 mph |
Max Load (lbs@psi) |
Original Equipment |
Tread Pattern |
|---|---|---|---|---|---|---|---|---|---|---|---|
| LT325/60R15/C | 106Q | RWL | 63198 | 9 - 11 | 13 on 9.5 | 30.6 | 19 | 680 | 2095@35 | KM | |
| LT255/75R17/C | 111/108Q | BSW | 86927 | 6.5 - 8.5 | 10.04 on 7 | 32.05 | 19 | 649 | 2405@50 | DC | KM-DT |
Original Equipment Key: DC = Daimler-Chrysler
* DT = Different Tread Pattern
Government UTQG Ratings do not apply to light truck sized tires.
1. The sizes shown are average design values for tires measured on specified measuring rim widths. Some tires may vary from this value by +/-3% of the section height (affecting overall diameter), and +/-4% of the section width.
2. Section width varies approximately 0.2" (5mm) for every 0.5" change in rim width.
WARNING: Serious or fatal injury may result from tire failure due to underinflation or overloading. To ensure correct air pressure and vehicle load, refer to vehicle owner's manual or tire information placard on the vehicle. Serious injury or death may result from explosion of tire/rim assembly due to improper mounting. Only tire professionals should mount tires and they should never inflate beyond 40 psi to seat the beads. Before mixing types of tires in any configuration on any vehicle, be sure to check the vehicle owner's manual for its recommendations.
DANGER: Never mount a 16" diameter tire on a 16.5" rim.
DANGER: Never mount a 17" diameter tire on a 17.5" rim.
Inflation pressure increase must not exceed the maximum pressure branded on the tire sidewall. When a customer requests a replacement tire with a lower speed rating than the original equipment tire, you must clearly communicate to him or her that the handling of the vehicle may be different, and that its maximum speed capability is limited to that of the lowest speed-rated tire on the vehicle. Exceeding the lawful speed limit is neither recommended nor endorsed.
* DT = Different Tread Pattern
Government UTQG Ratings do not apply to light truck sized tires.
1. The sizes shown are average design values for tires measured on specified measuring rim widths. Some tires may vary from this value by +/-3% of the section height (affecting overall diameter), and +/-4% of the section width.
2. Section width varies approximately 0.2" (5mm) for every 0.5" change in rim width.
WARNING: Serious or fatal injury may result from tire failure due to underinflation or overloading. To ensure correct air pressure and vehicle load, refer to vehicle owner's manual or tire information placard on the vehicle. Serious injury or death may result from explosion of tire/rim assembly due to improper mounting. Only tire professionals should mount tires and they should never inflate beyond 40 psi to seat the beads. Before mixing types of tires in any configuration on any vehicle, be sure to check the vehicle owner's manual for its recommendations.
DANGER: Never mount a 16" diameter tire on a 16.5" rim.
DANGER: Never mount a 17" diameter tire on a 17.5" rim.
Inflation pressure increase must not exceed the maximum pressure branded on the tire sidewall. When a customer requests a replacement tire with a lower speed rating than the original equipment tire, you must clearly communicate to him or her that the handling of the vehicle may be different, and that its maximum speed capability is limited to that of the lowest speed-rated tire on the vehicle. Exceeding the lawful speed limit is neither recommended nor endorsed.
