These BFGoodrich® tires carry a 65,000 mile limited warranty in addition to the standard materials and workmanship warranty for treadwear or mileage.
- Available on: Advantage™ Control™
- Speed Rating: V/W rated
The BFGoodrich® Advantage Control Tire gives you the peace of mind to roam confidently. Delivering all-season traction and everyday control, backed by 150 years of brand credibility.
Active Sipe Technology provides more biting edges for significantly increased wet traction. Advanced All-Season Tread Compunds are Silica-infused to deliver outstanding grip year round. Aqua-Flume™ Technology is a curvilinear groove network designed to disperse water from under the contact patch.
Computer Optimized Footprint manages tread wear evolution for longer life and a quiet ride. Next Generation g-Wedge Sidewall Stabilizer™ stabilizes sidewall for crisp handling and comfortable ride.
Full Depth Tread Features maintain consistent performance and look throughout the life of the tire.
Select your Year
Section Width on Measuring Rim Width
7.0" on 5.5"
Overall Diameter (in)
Max Load, Single (lbs@psi)
1168 @ 44
Tire Weight (lbs)
Rim Width Range (Min/Max)
Tread Depth (32nds)
(1) Based on internal wet braking results from 50 MPH using a 2017 Honda® Accord versus the General® Altimax and Cooper® CS5 Ultra Touring in size 215/60R16 95V. Actual on-road results may vary.
(2) Based on internal on-track noise test results using a 2017 Honda® Accord versus Yokohama® Ascend GT tires in size 205/55R16 XL 91H. Actual on-road results may vary.
(3) 75,000 mile limited treadlife warranty- H-rated, 65,000 mile limited treadlife warranty- V/W rated
>> The sizes shown are average design values for tires measured on specified measuring rim widths. Some tires may vary from this value by +/-3% of the section height (affecting overall diameter), and +/-4% of the section width.
>> Section width varies approximately 0.2" (5mm) for every 0.5" change in rim width.
>> Tread patterns are often tuned to accomodate different tire widths. Tires for a particular dimension of a given tireline may vary in appearance from the tire shown in the photograph
XL = Extra Load
WARNING: Serious or fatal injury may result from tire failure due to underinflation or overloading. To ensure correct air pressure and vehicle load, refer to vehicle owner's manual or tire information placard on the vehicle. Serious injury or death may result from explosion of tire/rim assembly due to improper mounting. Only tire professionals should mount tires and they should never inflate beyond 40 psi to seat the beads. Before mixing types of tires in any configuration on any vehicle, be sure to check the vehicle owner's manual for its recommendations.
DANGER: Never mount a 16" diameter tire on a 16.5" rim.
DANGER: Never mount a 17" diameter tire on a 17.5" rim.
Inflation pressure increase must not exceed the maximum pressure branded on the tire sidewall. When a customer requests a replacement tire with a lower speed rating than the original equipment tire, you must clearly communicate to him or her that the handling of the vehicle may be different, and that its maximum speed capability is limited to that of the lowest speed-rated tire on the vehicle. Exceeding the lawful speed limit is neither recommended nor endorsed.
For high-speed driving, additional inflation pressure and possibly reduced tire loading and/or upsizing is required. In the absence of specific recommendations by the vehicle manufacturer, use the following guidelines based on those in the European Tyre and Rim Technical Organization Standards Manual.
For speeds over 160km/h (100 mph), load and inflation must be adjusted according to the table below.
T-Speed Rated Sizes:
Maximum Speed (mph) 100 106 112 118
Inflation Increase (psi) 0.0 1.0 2.0 3.0
Load Capacity (% of max.) 100 100 100 100
H-Speed Rated Sizes:
Maximum Speed (mph) 100 106 112 118 124 130
Inflation Increase (psi) 0.0 1.0 2.0 3.0 4.0 5.0
Load Capacity (% of max.) 100 100 100 100 100 100
V-Speed Rated Sizes:
Maximum Speed (mph) 100 106 112 118 124 130 136 143 149
Inflation Increase (psi) 0 1 2 3 4 5 5 5 5
Load Capacity (% of max) 100 100 100 100 100 100 97 94 91