product header img 01
BFGOODRICH®
Rugged Trail T/A®
  • Mud and Snow

    Mud and Snow

  • All-Season

    All-Season

  • Light Truck/SUV/CUV

BFGOODRICH® RUGGED TRAIL T/A®

  • Light Truck/SUV/CUV
  • Mud and Snow

    Mud and Snow

  • All-Season

    All-Season

On and off-road performance for popular trucks.

  • Chosen by OEMs
  • Great Highway Performance
  • Light Off-Road Traction
  • Standard Limited Warranty: 6 years

Why is the Rugged Trail T/A® the right tire for you?

Great highway performance plus off-road traction

High-speed durability and stable handling on the road *

Find the right tire for you

4 sizes available for this tire

Rim

16''
17''
P265/70R16 111T TOY RWL
MSPN 73986
Mileage Warranty Standard
Section Width on Measuring Rim Width 10.00" on 8.00"
Overall Diameter 30.6
Max Load, Single (LB @ PSI) 2185 @ 35
Sidewall RWL
Revs/MI 680
Tire Weight 38.49
Rim Width Range (Min/Max) 7.00-9.00
Tread Depth (in 32nds) 10.51
Specifications
- M+S
LT245/75R17/E 121/118R FOR ORWL
MSPN 52343
Mileage Warranty Standard
Section Width on Measuring Rim Width 9.00" on 7.00"
Overall Diameter 31.5
Max Load, Single (LB @ PSI) 3195 @ 80
Revs/MI 660
Tire Weight 46.83
Rim Width Range (Min/Max) 6.50-7.50
Tread Depth (in 32nds) 14.51
Specifications
- M+S
LT245/75R17/E 121/118R FOR BSW
MSPN 61626
Mileage Warranty Standard
Section Width on Measuring Rim Width 9.00" on 7.00"
Overall Diameter 31.5
Max Load, Single (LB @ PSI) 3195 @ 80
Sidewall BSW
Revs/MI 660
Tire Weight 46.25
Rim Width Range (Min/Max) 6.50-7.50
Tread Depth (in 32nds) 14.51
Specifications
- M+S
LT265/70R17/E 121/118R FOR ORWL
MSPN 92139
Mileage Warranty Standard
Section Width on Measuring Rim Width 10.00" on 8.00"
Overall Diameter 31.7
Max Load, Single (LB @ PSI) 3195 @ 80
Revs/MI 657
Tire Weight 50.18
Rim Width Range (Min/Max) 7.00-8.50
Tread Depth (in 32nds) 14.51
Specifications
- M+S

Legal mentions

*Exceeding the safe, legal speed limit is neither recommended nor endorsed.

OE Code [Original Equipment Key]: FOR = Ford, TOY = Toyota

DT = different tread pattern.

* Passenger sizes used in Light Truck/SUV applications have reduced load capacity. This will differ from the maximum load branded on the tire sidewall.

Government UTQG Ratings do not apply to light truck sized tires.

>> The sizes shown are average design values for tires measured on specified measuring rim widths. Some tires may vary from this value by +/-3% of the section height (affecting overall diameter), and +/-4% of the section width.
>> Section width varies approximately 0.2" (5mm) for every 0.5" change in rim width.
>> Tread patterns are often tuned to accomodate different tire widths. Tires for a particular dimension of a given tireline may vary in appearance from the tire shown in the photograph.

WARNING: Serious or fatal injury may result from tire failure due to underinflation or overloading. To ensure correct air pressure and vehicle load, refer to vehicle owner's manual or tire information placard on the vehicle. Serious injury or death may result from explosion of tire/rim assembly due to improper mounting. Only tire professionals should mount tires and they should never inflate beyond 40 psi to seat the beads. Before mixing types of tires in any configuration on any vehicle, be sure to check the vehicle owner's manual for its recommendations. No tire is indestructible. An impact can cause a tire to fail, resulting in serious injury or death. Consult your tire owner's manual for proper maintenance instructions.

DANGER: Never mount a 16" diameter tire on a 16.5" rim.
DANGER: Never mount a 17" diameter tire on a 17.5" rim.

Inflation pressure increase must not exceed the maximum pressure branded on the tire sidewall. When a customer requests a replacement tire with a lower speed rating than the original equipment tire, you must clearly communicate to him or her that the handling of the vehicle may be different, and that its maximum speed capability is limited to that of the lowest speed-rated tire on the vehicle. Exceeding the lawful speed limit is neither recommended nor endorsed.

For high-speed driving, additional inflation pressure and possibly reduced tire loading and/or upsizing is required. In the absence of specific recommendations by the vehicle manufacturer, use the following guidelines based on those in the European Tyre and Rim Technical Organization Standards Manual.

For speeds over 160km/h (100 mph), load and inflation must be adjusted according to the table below.

S-Speed Rated Sizes:
Maximum Speed (mph) 100 106 112
Inflation Increase (psi) 0.0 1.0 2.0
Load Capacity (% of max.) 100 100 100

T-Speed Rated Sizes:
Maximum Speed (mph) 100 106 112 118
Inflation Increase (psi) 0.0 1.0 2.0 3.0
Load Capacity (% of max.) 100 100 100 100

H-Speed Rated Sizes:
Maximum Speed (mph) 100 106 112 118 124 130
Inflation Increase (psi) 0.0 1.0 2.0 3.0 4.0 5.0
Load Capacity (% of max.) 100 100 100 100 100 100

You are using an unsupported web browser
You are using a website browser that is not supported by this website. This means that some functionnality may not work as intented. This may result in strange behaviors when browsing round. Use or updgrade/install one of the following browsers to take full advantage of this website